File Wvdial:
[Modem0]
Modem =/dev/rfcomm0
Baud = 460800
SetVolume = 0
Dial Command = ATDT
Init1 = ATZ
Init3 = ATM0
FlowControl = CRTSCTS
[Dialer IM3]
Username = gprs
Password = im3
Phone = *99***1#
Stupid Mode = 1
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,¨IP¨,¨www.indosat-m3.net¨,¨¨,0,0
Inherits = Modem0
Kalo init 3 tidak dimasukkan:
nah pesan errornya ini :
wvdial im3
--> WvDial: Internet dialer version 1.54.0
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: ATM0
ATM0
OK
--> Modem initialized.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT*99***1#
CONNECT
~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Sun Jun 29 00:25:38 2008
--> pid of pppd: 3730
--> Disconnecting at Sun Jun 29 00:25:38 2008
--> The PPP daemon has died: pppd options error (exit code = 2)
--> man pppd explains pppd error codes in more detail.
--> I guess that's it for now, exiting
--> The PPP daemon has died. (exit code = 2)
Kalo Init3 dimasukkan ke dalam Wvdialconf, maka errornya menjadi seperti ini:
wvdial im3
--> WvDial: Internet dialer version 1.54.0
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,¨IP¨,¨www.indosat-m3.net¨,¨¨,0,0
AT+CGDCONT=1,B(IPB(,B(
www.indosat-m3.netB(,B(B(,0,0ERROR
--> Bad init string.
--> Cannot get information for serial port.
--> Cannot open /dev/rfcomm0: Input/output error
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,¨IP¨,¨www.indosat-m3.net¨,¨¨,0,0
AT+CGDCONT=1,B(IPB(,B(
www.indosat-m3.netB(,B(B(,0,0ERROR
--> Bad init string.
script GPRS saya :
show-password
connect ¨/usr/bin/wvdial--chat--config/etc/ppp/peers/gprs-chat¨
disconnect /etc/ppp/peers/gprs-disconnect-chat
/dev/rfcomm0
460800
crtscts
local
:10.0.0.1
noipdefault
ipcp-accept-local
defaultroute
usepeerdns
novj
nobsdcomp
novjccomp
nopcomp
noaccomp
noauth
gprs
Scrip gprs-connect-chat:
exec chat \
TIMEOUT 5 \
ECHO ON \
ABORT `\nBUSY\r´ \
ABORT `\nERROR\r´ \
ABORT `\nNO ANSWER\r´ \
ABORT `\nNO CARRIER\r´ \
ABORT `\nNO DIALTONE\r´ \
ABORT `\nRINGING\r\n\r\nRINGING\r´ \
¨ \rAT\
TIMEOUT 12 \
SAY ¨Press CTRL-C to close the connection at any stage!¨\
SAY ¨\ndefining PDP context...\n¨ \
OK ATH \
OK ATE1 \
OK ´AT+CGDCONT=1,¨IP¨,¨www.indosat-m3.net¨,¨¨,0,0´ \
OK ATD*99***1# \
TIMEOUT 22 \
SAY ¨\nDialing IndosatNet...\n¨ \
CONNECT ¨¨ \
SAY ¨\nConnected.¨\
SAY ¨\nIf the following ppp negotiations fail,\n¨ \
SAY ¨try restarting the phone.\n¨
Script GPRS-disconnect-chat:
exec /usr/sbin/chat -V -s -S \
ABORT ¨BUSY¨ \
ABORT ¨ERROR¨ \
ABORT ¨NO DIALTONE¨ \
SAY ¨\nSending break to the modem\n¨ \
¨¨ ¨\K¨ \
¨¨ ¨\K¨ \
¨¨ ¨\K¨ \
¨¨ ¨\d\d+++\d\dATH¨ \
SAY ¨\nPDP context detached\n¨ \
Saya sudah ganti handphone, masalahnya tetap sama.
Berulang kali saya kotak-katik Wvdial.cof, gprs, gprs-connect-chat, gprs-disconnect chat.
Tetap g ada keberhasilan sama sekali.
Udah hampir 3 minggu masalah ini gak terselesaikan.
kenapa?
Sepertinya FC-5 saya tidak mengenali modem via bluetooth.
apa hal yang belum saya lakukan.?
Saya sudah coba pakek KPP, tetap aja
g bisa connect.
Saya pindah ke KDE FC-5,
sama saja g connect.
Saya udah ganti kartu, tetap tidak connect...!!!!
